Adding To Your Cart...

BMW 2800, 3.0, Bavaria (1968-1976) Water Pump, Thermostat & Hoses - Water Pumps
Water Pumps
Is your car starting to run a little hot? Is it overheating while sitting at idle? It's possible you may need to replace your water pump. An easy way to check your water pump is to look underneath the car and check for water seepage out of the pump. This means that water is leaking past the bearing and seals, indicating the pump is on its way out. Another way to check is to squeeze and hold the upper radiator hose for a few seconds (CAUTION: the hose may be hot) while the car is running. If you feel no pressure building up, it is a sign that water is not circulating and the pump may be bad. These units are brand new, not rebuilt.

$ 50.00

2500, 2800, 3.0S and Bavaria Sedan (1968-74) | 2800CS Sedan (1968-71)
3.0CS and 3.0CSi Sedan (1971-74) | 3.0CSL Sedan (1971)
3.0Si Sedan (1971-76)

Note: Metal Impeller. Also use- (Qty.) (1) 11 51 1 265 654 gasket.

$ 253.75

2500, 2800, 3.0S and Bavaria Sedan (1968-74) | 2800CS Sedan (1968-71)
3.0CS and 3.0CSi Sedan (1971-74) | 3.0CSL Sedan (1971)
3.0Si Sedan (1971-76)

Note: Metal Impeller. Also use- (Qty.) (1) 11 51 1 265 654 gasket.

Additional products related to Water Pump, Thermostat & Hoses for your BMW 2800, 3.0, Bavaria (1968-1976) :

  • ...
  • 1
    //
  • 2//
  • 3//
  • 4//
  • 5
  • ...