318i Coupe (1992-98) | 318is Coupe (1992-97)
318ti and M3 Coupe (1995-99) | 323i Coupe (1998-99)
323is, 328i and 328is Coupe (1996-99) | 325i and 325is Coupe (1992-95)

318i Coupe (1992-98) | 318is Coupe (1992-97)
318ti and M3 Coupe (1995-99) | 323i Coupe (1998-99)
323is, 328i and 328is Coupe (1996-99) | 325i and 325is Coupe (1992-95)

318i Coupe (1992-98) | 318is Coupe (1992-97)
318ti and M3 Coupe (1995-99) | 323i Coupe (1998-99)
323is, 328i and 328is Coupe (1996-99) | 325i and 325is Coupe (1992-95)

318i Coupe (1992-98) | 318is Coupe (1992-97)
318ti and M3 Coupe (1995-99) | 323i Coupe (1998-99)
323is, 328i and 328is Coupe (1996-99) | 325i and 325is Coupe (1992-95)

90-Degree angle, 16.5mm mounting hole.

90-Degree angle, 16.5mm mounting hole.

Flat/straight angle, 16.5mm mount point.

318i Coupe (1992-98) | 318is Coupe (1992-97)
318ti and M3 Coupe (1995-99) | 323i Coupe (1998-99)
323is, 328i and 328is Coupe (1996-99) | 325i and 325is Coupe (1992-95)

- M3 (1995-99)

- M3 (1995-99)

318i Coupe (1992-98) | 318is Coupe (1992-97)
318ti and M3 Coupe (1995-99) | 323i Coupe (1998-99)
323is, 328i and 328is Coupe (1996-99) | 325i and 325is Coupe (1992-95)

318i Coupe (1992-98) | 318is Coupe (1992-97)
318ti and M3 Coupe (1995-99) | 323i Coupe (1998-99)
323is, 328i and 328is Coupe (1996-99) | 325i and 325is Coupe (1992-95)

318i Coupe (1992-98) | 318is Coupe (1992-97)
318ti and M3 Coupe (1995-99) | 323i Coupe (1998-99)
323is, 328i and 328is Coupe (1996-99) | 325i and 325is Coupe (1992-95)

Please check your thread size before ordering.

318i Coupe (1992-98) | 318is Coupe (1992-97)
318ti and M3 Coupe (1995-99) | 323i Coupe (1998-99)
323is, 328i and 328is Coupe (1996-99) | 325i and 325is Coupe (1992-95)

For Rev1 Tow Hooks.

For Rev1 Tow Hooks.

For Rev1 Tow Hooks.

For Rev1 Tow Hooks.

To be used in conjunction with REN-E85, REN-E86, and REN-E87.
It can be bolted in place and out of site using the optional mounting brackets, and then when needed, the screw in tow hook can simply be threaded into the end of the tube. These receivers have no finish.
Designed for use with screw in tow hooks (not included).

This screw in tow hook receiver is designed to be bolted in place, out of sight and then, when needed, the screw-in tow hook can simply be threaded in.

Base plate only, tow hook sold separately.

NOTE - Designed for use with Rennline's screw-in tow hooks (sold separately).

Works with Tow Hook Receivers REN-E81-4 and REN-E81
Allows for 2-5" of adjustability depending which mounting holes are used.

Mount only, GoPro Camera, Camera Case, Tow Hook, and thumb screw not included.
Designed to work with the REV2 Folding Tow Hook only.

318i Coupe (1992-98) | 318is Coupe (1992-97)
318ti and M3 Coupe (1995-99) | 323is, 328i and 328is Coupe (1996-99)
325i and 325is Coupe (1992-95)

318i Coupe (1992-98) | 318is Coupe (1992-97)
318ti and M3 Coupe (1995-99) | 323is, 328i and 328is Coupe (1996-99)
325i and 325is Coupe (1992-95)

318i Coupe (1992-98) | 318is Coupe (1992-97)
318ti and M3 Coupe (1995-99) | 323is, 328i and 328is Coupe (1996-99)
325i and 325is Coupe (1992-95)

318i Coupe (1992-98) | 318is Coupe (1992-97)
318ti and M3 Coupe (1995-99) | 323i Coupe (1998-99)
323is, 328i and 328is Coupe (1996-99) | 325i and 325is Coupe (1992-95)

45-Degree angle, 16.5mm mounting hole.

318i Coupe (1992-98) | 318is Coupe (1992-97)
318ti and M3 Coupe (1995-99) | 323i Coupe (1998-99)
323is, 328i and 328is Coupe (1996-99) | 325i and 325is Coupe (1992-95)

318i Coupe (1992-98) | 318is Coupe (1992-97)
318ti and M3 Coupe (1995-99) | 323i Coupe (1998-99)
323is, 328i and 328is Coupe (1996-99) | 325i and 325is Coupe (1992-95)

For Rev1 Tow Hooks.

For Rev1 Tow Hooks.

For Rev1 Tow Hooks.

To be used in conjunction with REN-E85, REN-E86, and REN-E87.
It can be bolted in place and out of site using the optional mounting brackets, and then when needed, the screw in tow hook can simply be threaded into the end of the tube. These receivers have no finish.
Designed for use with screw in tow hooks (not included).