- Cooper Paceman, Cooper Paceman JCW ALL4, Cooper Paceman S and Cooper Paceman S ALL4 Hatchback (2013-16)

- Cooper Paceman, Cooper Paceman JCW ALL4, Cooper Paceman S and Cooper Paceman S ALL4 Hatchback (2013-16)

- Cooper Paceman, Cooper Paceman JCW ALL4, Cooper Paceman S and Cooper Paceman S ALL4 Hatchback (2013-16)

- Cooper Paceman, Cooper Paceman JCW ALL4, Cooper Paceman S and Cooper Paceman S ALL4 Hatchback (2013-16)

90-Degree angle, 16.5mm mounting hole.

90-Degree angle, 16.5mm mounting hole.

Flat/straight angle, 16.5mm mount point.

- Cooper Paceman, Cooper Paceman JCW ALL4, Cooper Paceman S and Cooper Paceman S ALL4 Hatchback (2013-16)

Please check your thread size before ordering.

- Cooper Paceman, Cooper Paceman JCW ALL4, Cooper Paceman S and Cooper Paceman S ALL4 Hatchback (2013-16)

For Rev1 Tow Hooks.

For Rev1 Tow Hooks.

For Rev1 Tow Hooks.

For Rev1 Tow Hooks.

- Cooper Paceman, Cooper Paceman JCW ALL4, Cooper Paceman S and Cooper Paceman S ALL4 Hatchback (2013-16)

Note: Front or Rear.

To be used in conjunction with REN-E85, REN-E86, and REN-E87.
It can be bolted in place and out of site using the optional mounting brackets, and then when needed, the screw in tow hook can simply be threaded into the end of the tube. These receivers have no finish.
Designed for use with screw in tow hooks (not included).

This screw in tow hook receiver is designed to be bolted in place, out of sight and then, when needed, the screw-in tow hook can simply be threaded in.

Base plate only, tow hook sold separately.

NOTE - Designed for use with Rennline's screw-in tow hooks (sold separately).

Works with Tow Hook Receivers REN-E81-4 and REN-E81
Allows for 2-5" of adjustability depending which mounting holes are used.

Mount only, GoPro Camera, Camera Case, Tow Hook, and thumb screw not included.
Designed to work with the REV2 Folding Tow Hook only.

45-Degree angle, 16.5mm mounting hole.

For Rev1 Tow Hooks.

For Rev1 Tow Hooks.

For Rev1 Tow Hooks.

To be used in conjunction with REN-E85, REN-E86, and REN-E87.
It can be bolted in place and out of site using the optional mounting brackets, and then when needed, the screw in tow hook can simply be threaded into the end of the tube. These receivers have no finish.
Designed for use with screw in tow hooks (not included).