Adding To Your Cart...

BMW Z4 E85 (2003-2008) Clutch & Flywheel - Clutch Kits
Clutch Kits
This section contains clutches and related items. If you are looking for that little piece to complete your clutch job, you are in the right place. When doing a clutch job, it's always a good idea to replace the rear end seal on the engine at the same time and also replace the throw-out bearing, flywheel bolts and pilot bearing. You should also replace the clutch release fork and the master/slave cylinders at the same time for added insurance. If you are re-using your flywheel, you should have it re-surfaced so your new clutch seats correctly.
OEM OEM
21-21-7-523-620
(2)

$ 209.25

$ 195.02

- Z4 2.5i Convertible (2003-04)

Note: Contains- (Qty.) (1) Disc, (1) Pressure Plate, (1) Release Bearing, (1) Pilot Bearing, (1) Clutch Alignment Tool. Do not remove the shipping plate before the pressure plate and disc are installed on the flywheel. If the plate is removed prematurely, the clutch will self-adjust and become unusable.

$ 295.25

- Z4 2.5i Convertible (2003-04)

Note: Contains- (Qty.) (1) Disc, (1) Pressure Plate, (1) Release Bearing, (1) Pilot Bearing, (1) Clutch Alignment Tool. Do not remove the shipping plate before the pressure plate and disc are installed on the flywheel. If the plate is removed prematurely, the clutch will self-adjust and become unusable.

$ 431.76

$ 285.17

- Z4 2.5i Convertible (2003-04)

Note: Contains- (Qty.) (1) Disc, (1) Pressure Plate, (1) Release Bearing, (1) Pilot Bearing, (1) Clutch Alignment Tool. Do not remove the shipping plate before the pressure plate and disc are installed on the flywheel. If the plate is removed prematurely, the clutch will self-adjust and become unusable.

OEM OEM
21-20-7-587-368

$ 332.25

$ 309.86

- Z4 3.0i Convertible (2006-08)

Note: Contains- (Qty.) (1) Disc, (1) Pressure Plate, (1) Release Bearing, (1) Pilot Bearing, (1) Release Fork Lever, (1) Clutch Alignment Tool. Also use- (Qty.) (1) 23 00 0 392 607 bolt set, (6) 21 20 7 548 052 bolt. Do not remove the shipping plate before the pressure plate and disc are installed on the flywheel. If the plate is removed prematurely, the clutch will self-adjust and become unusable.

$ 490.63

$ 323.39

- Z4 3.0i Convertible (2006-08)

Note: Contains- (Qty.) (1) Disc, (1) Pressure Plate, (1) Release Bearing, (1) Pilot Bearing, (1) Release Fork Lever, (1) Clutch Alignment Tool. Also use- (Qty.) (1) 23 00 0 392 607 bolt set, (6) 21 20 7 548 052 bolt. Do not remove the shipping plate before the pressure plate and disc are installed on the flywheel. If the plate is removed prematurely, the clutch will self-adjust and become unusable.

OEM OEM
21-20-7-551-576

$ 326.75

$ 313.82

- Z4 2.5i Convertible (2003-04)
- Z4 2.5i Convertible (2005)

Note: Contains- (Qty.) (1) Disc, (1) Pressure Plate, (1) Release Bearing, (1) Clutch Alignment Tool. Do not remove the shipping plate before the pressure plate and disc are installed on the flywheel. If the plate is removed prematurely, the clutch will self-adjust and become unusable.

$ 604.77

$ 455.69

- Z4 2.5i Convertible (2003-04)
- Z4 2.5i Convertible (2005)

Note: Contains- (Qty.) (1) Disc, (1) Pressure Plate, (1) Release Bearing, (1) Clutch Alignment Tool. Do not remove the shipping plate before the pressure plate and disc are installed on the flywheel. If the plate is removed prematurely, the clutch will self-adjust and become unusable.

OEM OEM
21-21-7-837-984

$ 377.18

- Z4 M Coupe and Z4 M Roadster Coupe (2006-08)

Note: Contains- (Qty.) (1) Disc, (1) Pressure Plate, (1) Release Bearing, (1) Pilot Bearing, (1) Clutch Alignment Tool.

$ 1066.57

$ 966.27

- Z4 M Coupe and Z4 M Roadster Coupe (2006-08)

Note: Contains- (Qty.) (1) Disc, (1) Pressure Plate, (1) Release Bearing, (1) Pilot Bearing, (1) Clutch Alignment Tool.

Additional products related to Clutch & Flywheel for your BMW Z4 E85 (2003-2008) :

  • ...
  • 1
    //
  • 2//
  • 3//
  • 4//
  • 5
  • ...